Tuesday, August 10, 2010

College of Engineering & Management,Kolaghat

      College of Engineering & Management,Kolaghat
     ---------------------------------------------------------------------




                                  Vision Statement
                                                  
To develop and create a center of excellence for developing world class technical and managerial manpower for value based services to humanity at large with specific focus on India and its rural people by constructively contributing towards ensuring social and environmental security of the people on a sustainable basis

During the first few years of the college, the College was streamlining the teaching learning process and was primarily examination oriented. Apart from introducing modern methods of teaching using audio-visual aids, the focus of the college has now been shifted towards the finer points of personality development of the students.


                                              Mission Statement
                             
To impart quality education with an objective to conduct leading edge in Technology for development of value added technical and managerial manpower by introducing Post-Graduate, Doctoral and Post-Doctoral programmes to promote Research and Development in these fields for the upliftment of the global economy with specific focus on India.


  • The college strives to achieve the mission and vision as envisaged by the management with full support from the faculty, staff and students and giving due focus on the following attributes:
  • A modern & liberal student friendly environment
  • Highly developed modern laboratories, educational inputs and amenities.
  • Highest degree of professionalism blended with human insight.
  • Continuous improvement in the standard, aptitude, knowledge and skill of the students to make them leaders of tomorrow.
  • Warm, free and interactive teacher-student relationship.
  • Education through a blend of class-lecture and Audio-video aids.
  • Uninterrupted power and potable water supply throughout the campus for 24 hours.
  • Modern Language Laboratory for improvement of communication skill .
  • LAN facility, Internet Service, CAD Centre.
  • A spacious fully air conditioned well-equipped Library with good collection of books and journals, including e-Journals.
  • Book Bank for the benefit of students.
  • Multimedia Laboratory, Network Laboratory, Computer Communication Laboratory
  • Facility of learning Foreign Languages in collaboration with professional bodies.
  • Membership of prestigious Institutions and Associations such as IEEE (U.S.A.), IETE and IE(I).
  • Research & Development activities sponsored by Department of Science & Technology and Industries.
  • Outdoor & Indoor games, Cultural activities.

  • A global outlook that does not lose sight of the national perspective. In other words, it is an Institution of the 21st Century that is capable of looking ahead towards the future, while remaining firmly rooted to the ground reality.
 Contact ::http://www.cemkolaghat.org/
Continue reading...

Monday, August 9, 2010

GATE Mathematics books for 2011

Gate Mathematics Books collection


Just click on the link below to download mathematics books.

Following books of mathematics are in djvu file format, to read this book u have to download djvu reader so i give u one link to download djvu reader. if u got any problem then comment here.

AdvancedEngineeringMaths-Kreyzig

Kreyzig Answers to Advanced Engineering
http://www.mediafire.com/?otwlggu5mio

ROSEN
McGraw-Hill: Instructor's Resource Guide for Discrete Mathematics and Its Applications - 5th Edition

Discrete mathematics and it's applications 6th Edition

http://www.mediafire.com/?yjudngmmjmo

Graph.Theory Narisng Deo
Schaum's Outline of Graph Theory: Including Hundreds of Solved Problems
http://www.mediafire.com/?jnaqnmmmyay

Schaum's Outline of Differential Equations

http://www.mediafire.com/?nym4jjnkzzg

Differential calculus schaum series

http://www.mediafire.com/?oznjzkhnann

Schaum outline DiscretMath

http://www.mediafire.com/?ieyl5glnazu

DJVU reader....

http://rapidshare.com/files/266198459/djvu_reader.rar
Continue reading...

GATE CS-IT 20 YEAR QUESTION PAPER

Previous years questions papers are vital to your exam  preparation . The same applies to GATE exam as well. GATE previous years question papers gives you an idea about the exam pattern and about the questions being asked .  Solving the previous years question papers contributes to about 70 % of your  GATE preparations . Here are the last 20 years GATE CS IT questions papers  which you can download and study .


GATE 1991 Question paper     Download
GATE 1992 Question paper     Download 
GATE 1993 Question paper     Download
GATE 1994 Question paper     Download
GATE 1995 Question paper     Download
GATE 1996 Question paper     Download
GATE 1997 Question paper     Download
GATE 1998 Question paper     Download
GATE 1999 Question paper     Download
GATE 2000 Question paper     Download 
GATE 2001 Question paper     Download
GATE 2002 Question paper     Download
GATE 2003 Question paper     Download 
GATE 2004 Question paper     Download 
GATE 2005 Question paper     Download 
GATE 2006 Question paper     Download
GATE 2007 Question paper     Download 
GATE 2008 Question paper     Download
GATE 2009 Question paper     Download 
GATE 2010 Question paper     Download
Multiple Question Bank in Computer Science: MCA, BCA, MBA, AMIE, CA, GATE.AGRE, MCSE and OCP Exams
Continue reading...

Free books for Mechanical engineering Gate -2011

please click on links for free download. For good quiality books You can buy just click on the books image.
Strength of Materials: Timoshenko, B.C. Punamia, Rama Murtham 
Mechanics of MaterialsDownload link 1
Download link 2
Download link 3


Materials Science and Engineering: An Introduction 7e William D. Callister
Fundamentals of Materials Science and Engineering: An Interactive e . Text, 5th EditionDownload 

 Heat and Mass Transfer: JP Hollman,R.C. Sachdeva
Download link 1
Download link 2 
The free link is also given .
Continue reading...

Free books for ECE Gate -2011


Some books for Electronics and communication student , who going to give Gate exam in 2011
Digital Electronics

Digital Logic And Computer Design - Morris Mano


Network Theory 

Circuit Analysis

Electric Circuits -Schaum's Outlines


Communications:
Continue reading...

ST.Thomas' College of Engineering & Technology

About Us ::


In a bid to supplement the efforts of the West Bengal Government and the All India Council for Technical Education (AICTE) in expanding the infrastructure of technical education in this region it was contemplated in 2000 to establish an Engineering College for the benefit of students in West Bengal in general and assist the christian students in the region, in particular. To give the idea a shape, St.Thomas' College of Engineering & Technology was established with the intention to impart quality technical education to the students and imbibe confidence into the young talents graduating from the institution to stand up to the challenges of life with confidence.To ensure this, a plan was made so that it could become a seat of excellence in due course of time. Based on this preamble, the St. Thomas' College of Engineering & Technology at 4, Diamond Harbour
Road, Kidderpore, Kolkata 700023,West Bengal came into being on 29th August 2000.


Brief History::
 College Contacts ::

The St. Thomas' College of Engineering & Technology was established on 29th of August 2000 on a land measuring 5.276 acre alloted by the St. Thomas' School based on the No Objection Cretificate granted by the Government of West Bengal vide Order No.591-Edn(T) dated 28th December, 1999 issued by the Principal Secretary, Department of Higher Education. The All India Council for Technical Education (AICTE) granted approval vide letter No. 750-80-123(E)/ET/2000 dated 13.07.2000 issued by the Adviser (E&T).


The approval was extended by AICTE for the academic session 2001-02, 2002-03 & 2003-04 vide letters F.No.750-80-123(E)/ET/2000, F.No.750-80-123(E)/ET/2000 F.No.750-80-123(E)/ET/2000 dated July 03 2001, 03.06.2003 & 30th April 2003 respectively. The approval was extended for academic sesssion 2006-07 vide order F.No.750-80-123(E)/ET/2000 dated 15.05.2006.


 
 Phone No.: 033-24481081/1082 , Fax No. : 24482914 ,
 E-mail : stcet@Dataone.in
Continue reading...

GATE Syllabus:: MECHANICAL SCIENCE ME-2011

Engineering Mathematics


Linear Algebra: Matrix algebra, Systems of linear equations, Eigen values and eigen vectors.

Calculus: Functions of single variable, Limit, continuity and differentiability, Mean value theorems, Evaluation of definite and improper integrals, Partial derivatives, Total derivative, Maxima and minima, Gradient, Divergence and Curl, Vector identities, Directional derivatives, Line, Surface and Volume integrals, Stokes, Gauss and Green's theorems.

Differential equations: First order equations (linear and nonlinear), Higher order linear differential equations with constant coefficients, Cauchy's and Euler's equations, Initial and boundary value problems, Laplace transforms, Solutions of one dimensional heat and wave equations and Laplace equation.

Complex variables: Analytic functions, Cauchy's integral theorem, Taylor and Laurent series.

Probability and Statistics: Definitions of probability and sampling theorems, Conditional probability, Mean, median, mode and standard deviation, Random variables, Poisson, Normal and Binomial distributions.

Numerical Methods: Numerical solutions of linear and non-linear algebraic equations Integration by trapezoidal and Simpson's rule, single and multi-step methods for differential equations.

Applied Mechanics and Design
Engineering Mechanics: Free body diagrams and equilibrium; trusses and frames; virtual work; kinematics and dynamics of particles and of rigid bodies in plane motion, including impulse and momentum (linear and angular) and energy formulations; impact.

Strength of Materials: Stress and strain, stress-strain relationship and elastic constants, Mohr's circle for plane stress and plane strain, thin cylinders; shear force and bending moment diagrams; bending and shear stresses; deflection of beams; torsion of circular shafts; Euler's theory of columns; strain energy methods; thermal stresses.

Theory of Machines: Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of slider-crank mechanism; gear trains; flywheels.

Vibrations: Free and forced vibration of single degree of freedom systems; effect of damping; vibration isolation; resonance, critical speeds of shafts.

Design: Design for static and dynamic loading; failure theories; fatigue strength and the S-N diagram; principles of the design of machine elements such as bolted, riveted and welded joints, shafts, spur gears, rolling and sliding contact bearings, brakes and clutches.

Fluid Mechanics and Thermal Sciences

Fluid Mechanics: Fluid properties; fluid statics, manometry, buoyancy; control-volume analysis of mass, momentum and energy; fluid acceleration; differential equations of continuity and momentum; Bernoulli's equation; viscous flow of incompressible fluids; boundary layer; elementary turbulent flow; flow through pipes, head losses in pipes, bends etc.

Heat-Transfer: Modes of heat transfer; one dimensional heat conduction, resistance concept, electrical analogy, unsteady heat conduction, fins; dimensionless parameters in free and forced convective heat transfer, various correlations for heat transfer in flow over flat plates and through pipes; thermal boundary layer; effect of turbulence; radiative heat transfer, black and grey surfaces, shape factors, network analysis; heat exchanger performance, LMTD and NTU methods.

Thermodynamics: Zeroth, First and Second laws of thermodynamics; thermodynamic system and processes; Carnot cycle. irreversibility and availability; behaviour of ideal and real gases, properties of pure substances, calculation of work and heat in ideal processes; analysis of thermodynamic cycles related to energy conversion.

Applications: Power Engineering: Steam Tables, Rankine, Brayton cycles with regeneration and reheat. I.C. Engines: air-standard Otto, Diesel cycles. Refrigeration and air-conditioning: Vapour refrigeration cycle, heat pumps, gas refrigeration, Reverse Brayton cycle; moist air: psychrometric chart, basic psychrometric processes. Turbomachinery: Pelton-wheel, Francis and Kaplan turbines - impulse and reaction principles, velocity diagrams.

Manufacturing and Industrial Engineering

Engineering Materials: Structure and properties of engineering materials, heat treatment, stress-strain diagrams for engineering materials.

Metal Casting: Design of patterns, moulds and cores; solidification and cooling; riser and gating design, design considerations.

Forming: Plastic deformation and yield criteria; fundamentals of hot and cold working processes; load estimation for bulk (forging, rolling, extrusion, drawing) and sheet (shearing, deep drawing, bending) metal forming processes; principles of powder metallurgy.

Joining: Physics of welding, brazing and soldering; adhesive bonding; design considerations in welding.

Machining and Machine Tool Operations: Mechanics of machining, single and multi-point cutting tools, tool geometry and materials, tool life and wear; economics of machining; principles of non-traditional machining processes; principles of work holding, principles of design of jigs and fixtures

Metrology and Inspection: Limits, fits and tolerances; linear and angular measurements; comparators; gauge design; interferometry; form and finish measurement; alignment and testing methods; tolerance analysis in manufacturing and assembly.

Computer Integrated Manufacturing: Basic concepts of CAD/CAM and their integration tools.

Production Planning and Control: Forecasting models, aggregate production planning, scheduling, materials requirement planning.

Inventory Control: Deterministic and probabilistic models; safety stock inventory control systems.
Operations Research: Linear programming, simplex and duplex method, transportation, assignment, network flow models, simple queuing models, PERT and CPM.
Continue reading...

Friends

Followers

a

a

Engineers World Copyright © 2009 Not Magazine 4 Column is Designed by Ipietoon Sponsored by Dezigntuts